Related Manuals for WALPOL WNG-S1
Summary of Contents for WALPOL WNG-S1
- Page 1 Assembly and operating instructions Grease separator WNG-S1 + WNG-S2 Version 6.3...
-
Page 2: Table Of Contents
Annual maintenance 3. Warranty 10.4. 5-Annual general inspection 4. Delivery, transport, storage 11. Decommissioning/storage 5. Description 12. Operating log 5.1. Grease separator WNG-S1/S2 13. Declaration of performance 5.2. Grease separator data 13.1. WNG-S1 5.3. Intended use 13.2. WNG-S2 6. Installation 14. -
Page 3: General Information
1. General information For reasons of clarity, these operating instructions do not contain all detailed information on the machine and cannot take into account every conceivable case of setting, operation or maintenance. If you require further information or if problems occur that are not listed in the operating instructions, please contact our customer service in confidence. -
Page 4: Technical Regulations To Be Observed
2.2. Technical regulations to be observed: • DIN 1986 Drainage systems for buildings and land, Part 30. 100 • DIN EN 752 Drainage systems outside buildings. Parts 1-7 • DIN EN 1825 Separator systems for grease, Part 2 • Draft DIN 4040, Part 100 •... -
Page 5: Personal Protective Equipment
In order for warranty claims to be asserted, the products must be connected properly and operated and used in accordance with the data sheets. Another prerequisite is a fully completed operating log, which can be requested from Walpol in the event of a warranty claim. -
Page 6: Description
Avoid exposure to extreme heat or cold. 5. Description 5.1. Grease separator WNG-S1/S2 A grease separator is used wherever waste water containing grease is to be expected. The grease separator separates grease, oil and sludge from the waste water. Thanks to the flushing and disposal device, the grease separator can be dis- posed of with virtually no odour nuisance, as the odour-tight system does not have to be opened for this purpose. -
Page 7: Intended Use
Type WNG-S2 Nominal size Sludge trap 200 litres Grease separator chamber 482 litres Weight 143 kg 1790 1688 1490 5.3. Intended use The separator system is intended exclusively for the separation of saponifiable oils and fats of vegetable and animal origin. Any other use is considered improper. -
Page 8: Installation
• If the inlet pipe is longer than 10 m, it must be vented separately. • Foreign objects (cutlery, crown caps, mustard bags, bones, etc.) disturb the separation process.) interfere with the operation of the separator • In areas at risk of flooding, the system can be secured against floating 6.2. -
Page 9: Foreseeable Misuse
If damage occurs within the warranty period, the cause of which is doubtful and for which you would like to make a war- ranty claim, please notify WALPOL immediately and await further instructions. Until the cause has been clarified or released by us, the grease separator system is to be left in the condition in which it was placed by the damage. -
Page 10: Emptying
8. Emptying 8.1. Manual (without direct disposal pipe) • To empty the grease separator, first open the container lid. Emptying is then carried out by extracting the entire grease separator contents via the suction hose of the disposal tanker. • The grease separator must be completely cleaned after emptying and then refilled with fresh water up to the overflow. -
Page 11: Weekly Inspections (Recommendation)
Operating log Grease separator series WNG-S1/S2 The respective times and results of the self-checks carried out must be recorded in the operating log, main- tenance and inspections, the disposal of removed contents (file the disposal company's removal records) and... - Page 12 the rectification of any defects found.The operating log and test reports must be kept by the operator and pre- sented on request to the locally competent supervisory authorities or the operators of the downstream munici- pal waste water systems. Note Timely and regular emptying, cleaning and maintenance of the grease separa- tor system guarantees proper functioning.
- Page 13 Operating log Grease separator TYPE S1/S2 Commissioning Company: Date: Emptying/name Maintenance/self-inspection Signature Date Disposal company (according to instructions) (disposal company)
-
Page 14: Declaration Of Performance
Declaration of performance 13.1. WNG-S1 1. Unique identification code of the product type: • Stainless steel grease separator systems with integrated sludge trap (see annex to the declaration of performance) 2. Type, batch or serial number or other mark identifying the construction product in accordance with Article 11(4): •... -
Page 15: Eu Declaration Of Conformity
Signed for the manufacturer and on behalf of the manufacturer by: Place: Gelsenkirchen Date: 01.12.2021 Maximilian Girnus Managing Director WALPOL GmbH EU Declaration of Conformity According to Machinery Directive 2006/42/EC Annex II 1A. The manufacturer of the machine Manufacturer: Walpol GmbH Benzstr. - Page 16 The designated separator system is intended for the separation of fats of vegetable and/or animal origin from waste water by means of gravity for the protection of drainage systems. Location: Gelsenkirchen Date: 01.12.2021 Maximilian Girnus Managing Director WALPOL GmbH Information on CE marking in the accompanying documents Walpol GmbH Benzstr. 13 45891 Gelsenkirchen EN ISO 1825-1:2004...
-
Page 17: Expert Opinion
Expert opinion 15.1. Grease separator WNG-S1 Scientific and technical opinion on the load-bearing capacity and stability of the grease separator made of acid-resistant steel OLAN Projects of 17.02.2021... -
Page 21: Grease Separator Wng-S2
15.2. Grease separator WNG-S2 Test mark 01130/19/Z00NZK Scientific and technical report on the load-bearing capacity and stability of the grease separator made of acid-resistant steel... - Page 26 ww. .eu...