Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+
PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24
ATTENTION
!
!
Ensure all bolts and screws are tightened, check bolts and screws every 6 months.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
1 of 4
Advertisement
Related Manuals for Performance Furnishings PLTEAB4872E2S2MNF
Summary of Contents for Performance Furnishings PLTEAB4872E2S2MNF
- Page 1 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+ PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24 Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions. 1 of 4 PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24 ATTENTION Ensure all bolts and screws are tightened, check bolts and screws every 6 months.
- Page 2 ASSEMBLY INSTRUCTIONS MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+ PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24 Parts List Place the Table Leg Frame on the Drawing Name Adjustable Beam bottom side of the table top. Column Side Support Feet Handset Screw M6x10 Screw M5x22 Screw 3x19 Screw 10x35 Allen Key 4...
- Page 3 ASSEMBLY INSTRUCTIONS MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+ PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24 Detail A Detail B Tighten up the screws. Step. Step. Put Handset's connecting line through the hole below Step. the left Adjustable Beam. 3 of 4...
- Page 4 ASSEMBLY INSTRUCTIONS MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+ PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24 ※ Important ※ Reset the table before use : 1. Press and hold & for more than 3 seconds. ∧ ∨ 2. Continue pressing both buttons until both columns are in the lowest position. 3. The table will rebound 2-5mm.