Table of Contents
Advertisement
Standard Repair Process Detail Technical Manual
symptom
Content
Checking order when there is no audio
1.Check the contact condition of or 20V connector of Main Board.
2. Measure the 20V input voltage supplied from Power Board.
(If there is no input voltage, remove and check the connector.)
3.Connect the tester P5902 to the speaker terminal and if you hear the 'Chik~ Chik~'
sound when you touch the GND and output terminal, the speaker is normal.
Error
C. Audio error_No audio/Normal video
Voltage and speaker checking method
when there is no audio
Established
date
Revised
date
③
②
①
A12
Copyright © 2021 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.
A12
Advertisement
Table of Contents
