Troubleshooting - Haier HFK-136AA User Instructions

4. Remove the three screws (5) that hold the lower hinge (6) and make sure to remove the
lower hinge(6).
5. Remove the adjustable leg (8) and transfer it to right side.
6. Remove the bolt-pin (7) and reverse the direction of lower hinge (6). Install the lower hinge
(6) into left side with three screws (7).
7. Insert the bolt-pin (7) to the lower hinge (5).
8. Remove the hinge pin (9) that is in the bottom of door. At the other side of door, insert the
replacement hinge pin that is supplied with the appliance.
9. Set the door to its place and make sure the door seat at the lower hinge (6).
10. Fix the upper hinge (4) with the two screws (3) and the top with four screws (1) (2).

TROUBLESHOOTING

If your device shows the other symptoms that those described above, please call the service
after sale of the shop a retailer.
Symptom
The appliance
does not work
The appliance
makes a lot of
noise
The appliance
doesn't cool
enough
Cause
There is no power supply
The fuse doesn't work
The appliance is too close to
the wall, or is not stable, or the
accessories inside the freezer
are placed in wrong position
The door is too often opened or
was left opened for a long time
The appliance is too close to
the wall
The freezer is too full
The temperature is badly,
adjusted
Solution
Check the plug connecting it others
appliance, or verify that the
appliance is connected to the plug
Replace the fuse
Stabilize the base of the freezer by
adjusting the position of feet, take
away the device of the wall, place
correctly the accessories inside the
freezer
Close the door and do not open it
too much frequently
Take away the device of the wall to
favor the ventilation
Remove food of the device
Turn the knurl of regulation of
temperature on "3" or more
-8-