Related Manuals for Radar Electronics PreView CD6102
Summary of Contents for Radar Electronics PreView CD6102
- Page 1 www.radar-electronics.com e-mail.:info@radar-electronics.com PreView ® Display CD6102 / CD6102 OC / CD6102-2 Operating Manual...
-
Page 2: Table Of Contents
Contents Operator Display Description ..........1 Display Unit Function ............2 Mounting Instructions ............2 Troubleshooting ..............3 Specifications ................4 Warranty Information ............5 PreView Add-on Options ............6 ®... - Page 3 PATENTS Patented under one or more of the following U.S. Patents: 5345471, 5523760, 5457394, 5465094, 5512834, 5521600, 5682164, 5630216, 5510800, 5661490, 5609059, 5774091, 5757320, 5581256, 5832772, 5519400, 5767953, 5767627, 5589838, 5563605, 5661385, 5517198, 5610611, 5883591, 5805110, 5754144, 7088284, and 7215278. Other patents have been applied for.
-
Page 4: Operator Display Description
Operator Display Description CD6102– the CD6102 operator display family is a Common Display used with all the PreView® CAN based sensors. This display provides the vehicle operator with a visual indication of a detected object. The display unit also contains a buzzer to provide an audible alert that will increase in rate as an object becomes closer, providing the operator with another cue that an object is being detected. -
Page 5: Display Unit Function
Display Unit Function Range Indications Display Buzzer 5 Zones Status LED Volume Control/ Ack Switch* Item Description Illuminates green continuously after power is applied to the system. The Status LED status will change from green to red if a system malfunction occurs. Illuminates to give operator a relative distance measurement to the closest Range detected object. -
Page 6: Troubleshooting
Troubleshooting Display Status LED is not illuminated. Verify that DC power (9-33V) is applied to the sensor. Verify that the cable between the sensor and display is connected. Display Status LED is RED. Check connection between display and sensor. Display Status LED is RED and one Yellow LED is illuminated. -
Page 7: Specifications
Specifications DISPLAY SPECIFICATIONS (Typical) Housing Material: Polycarbonate/ABS alloy Dimensions: 1.00”H x 2.25"W x 2.00"D (2.5cm x 5.7cm x 5.1cm) Weight: 0.25 lb. (0.11 kg) Mounting: User dependent ELECTRICAL SPECIFICATIONS Power supplied by sensor OPERATING CHARACTERISTICS Warning Ranges: 5 zones COMMUNICATION Physical Layer: CAN 2.0B, 250 KB/s Protocol Layer:... -
Page 8: Warranty Information
Warranty Information MANUFACTURER STANDARD LIMITED WARRANTY AND LIMITATION OF LIABILITY Manufacturer warrants that on the Date of Purchase this Product will conform to Manufacturer's published specifications for the product, which are available from Manufacturer on request, and Manufacturer warrants that the product is free from defects in materials and workmanship. This Limited Warranty for the Display extends for sixty (60) months from the date of shipment. -
Page 9: Preview ® Add-On Options
PreView Add-on Options: ® PreView Plus Camera/Monitor System – ® Ultimate safety and object detection system configurable with up to 4 cameras and 24 sensors. PreView Safety Alert System – ® The PreView® Radar Sensor detects an object in the blind spot. Once the object is detected, the sensor triggers the back-up alarm to either increase the sound of the alarm OR change the beep rate to alert pedestrians outside of the vehicle of the danger. - Page 10 www.radar-electronics.com e-mail.:info@radar-electronics.com tel.. 00386 3 4900 800 Tel: +386 3 4900 800 http://radar-electronics.com/ 3700046C Copyright 2016 Page 7...
Need help?
Do you have a question about the PreView CD6102 and is the answer not in the manual?
Questions and answers