Beko WMY 814831 User Manual
Beko WMY 814831 User Manual

Beko WMY 814831 User Manual

Hide thumbs Also See for WMY 814831:

Advertisement

Quick Links

Washing Machine
User Manual
WMY 814831
EN
Document Number=
2820527135_EN/ 10-12-18.(15:16)

Advertisement

Table of Contents
loading

Summary of Contents for Beko WMY 814831

  • Page 1 Washing Machine User Manual WMY 814831 Document Number= 2820527135_EN/ 10-12-18.(15:16)
  • Page 2: General Safety Instructions

    1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur.
  • Page 3: Children's Safety

    1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •...
  • Page 4: Important Instructions For Environment

    2. Important instructions for DANGER! environment • Plug the product into a 2.1 Compliance with WEEE Directive grounded outlet protected by This product complies with EU a 16 A fuse. Do not neglect to WEEE Directive (2012/19/EU). This product bears a classification have the grounding installation symbol for waste electrical and made by a qualified electrician.
  • Page 5: Technical Specifications

    4 Technical specifications Supplier name or trademark Beko Model name WMY 814831 Rated capacity (kg) Maximum spin speed (rpm) 1400 Built-in Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Single Water inlet / Double Water inlet • / - •...
  • Page 6: Appropriate Installation Location

    4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's...
  • Page 7: Connecting The Drain Hose To The Drain

    • In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
  • Page 8: Electrical Connection

    4.2 Preparation 4.1.7 Electrical connection Connect the product to a grounded outlet 4.2.1 Sorting the laundry protected by a 16 A fuse. Our company shall * Sort laundry according to type of fabric, not be liable for any damages that will arise color, and degree of soiling and allowable when the product is used without grounding in water temperature.
  • Page 9: Loading The Laundry

    • Operate the product in the highest The detergent drawer capacity allowed by the programme you have selected, but do not overload; see, is composed of three "Programme and consumption table". See, compartments: “Programme and consumption table" – (1) for prewash •...
  • Page 10 Using gel and tablet detergent • Do not use amounts exceeding the dosage quantities recommended on the detergent • If the gel detergent thickness is fluidal and package to avoid problems of excessive your machine does not contain a special liquid foam, poor rinsing, financial savings and detergent cup, put the gel detergent into the finally, environmental protection.
  • Page 11: Tips For Efficient Washing

    4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature temperature range based temperature range temperature range based range based on on soiling level: cold-40 based on soiling on soiling level: 40-90 oC) soiling level: cold level: cold -30 oC) -40 oC)
  • Page 12: Operating The Product

    4.3 Operating the product 17 - Programme selection knob 18 - Temperature selection LEDs 4.3.1 Control panel 19 - Spin speed selection LEDs 20 21 22 23 24 20 - Duration information display 21 - Child lock enabled LED 22 - End Time Setting button 23 - Door lock enabled LED 24 - Programme follow-up indicator LEDs 25 - On / Off button...
  • Page 13: Temperature Selection

    • BabyProtect+ • Hygiene 20° Use this programme for your laundry for Use this programme for your laundry for which which you require an anti-allergic and hygienic you require washing at lower temperature with washing at high temperature with intensive and intensive and long washing cycle.
  • Page 14: Programme And Consumption Table

    Programme will resume and complete after INFORMATION draining the water. • If the programme has not reached If you want to spin the laundry held in water, the spinning step, you can change adjust the Spin Speed and press Start / Pause the speed without switching the button.
  • Page 15 • : Selectable. Furthermore, you may also select or cancel auxiliary functions that are suitable to the * : Automatically selected, no canceling. running programme after the washing cycle ** : Energy Label programme (IEC 60456:2010) starts. If you wash cycle has reached a point *** : If maximum spin speed of the machine is where no auxiliary function can be selected, the lower then this value, you can only select up...
  • Page 16 • Pet Hair Removal INFORMATION This function helps to remove pet hair that remain on your garments more effectively. • Additional laundry may be loaded during the When you select this function, Prewash and End Time countdown period. At the end of Extra Rinse steps are added to the normal the countdown, End Time indicator turns programme.
  • Page 17 4.3.12.1 To activate the child lock: on the Programme Follow-up indicator to show that the machine has been switched Press and hold Auxiliary Function button to the pause mode. Also, Loading Door light 2 for 3 seconds. In the programme selection will also flash until the door is ready to be display on the panel, "CL On"...
  • Page 18: Maintenance And Cleaning

    4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel.
  • Page 19: Draining Remaining Water And Cleaning The Pump Filter

    4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The product has an emergency water draining The filter system in your machine prevents solid items such as buttons, coins and fabric hose, in order to drain the water: fibers clogging the pump impeller during discharge of washing water.
  • Page 20: Troubleshooting

    5 Troubleshooting Loading door cannot be opened. • Door lock is activated because of the water level in the Program does not start after closing the door. machine. >>> Drain the water by running the Pump or • Start / Pause / Cancel button was not pressed. >>> *Press Spin programme.
  • Page 21 Machine does not switch to spinning step. (*) Colour of the clothes faded. (**) • There might be unbalanced load in the machine. >>> • Excessive laundry was loaded in. >>> Do not load the Automatic unbalanced load detection system might be machine in excess.
  • Page 22 Detergent residue in the detergent drawer. (**) Laundry remains wet at the end of the programme. • Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent. • Excessive foam might have occurred and automatic foam •...
  • Page 24 www.beko.com...

Table of Contents