KEKAI ADRIANO KT1204 Operation Instructions Manual page 10

Ash vacuum cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
Connect one end of the metal hose (7), or the aluminum nozzle (10) with the suction port (1) on tank
tightly.
Switch on: set the switch (2) to " I "
Switch off: set the switch (2) to "O"
Put the aluminum nozzle (10) into a fireplace or stove to vacuum ash.
Move the aluminum nozzle with light pressure slowly and evenly over the ash.
Maintenance and Cleaning
Stop the cleaner.
Disconnect the mains plug from the power supply.
Disconnect hose, tube and container.
Clean metal hose connectors, metal hose and tube after use, and keep them unblocked.
Use a damp cloth to clean the plastic parts.
Empty the dust container, and if necessary, wash it.
Clean the dust on filter (8) with brush, and if necessary, wash it.
Do not use cleaning products, solvents or sharp objects for this purpose.
Repairment
Only use accessories and spare parts recommended by the manufacturer. If the equipment fail some
day in spite of our quality controls and your maintenance, only have it repaired by an authorized
electrician.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Warranty Information
The manufacturer provides warranty in accordance with the legislation of the customer's own country of
4/5

Advertisement

Table of Contents
loading

Table of Contents