Download Print this page

Electrolux ECN 1547 Instruction Book page 13

Hide thumbs Also See for ECN 1547:

Advertisement

Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
This appliance must be earthed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance rating
plate.
The appliance is supplied with a 13amp plug fitted. In the
event of having to change the fuse in the plug supplied, a
13amp ASTA approved (BS1362) fuse must be
used.Should the plug need to be replaced for any reason.
The wires in the mains lead are coloured in accordance with
the following code:
Green and Yellow:
Blue:
Brown:
The wire coloured green and yellow must be connected to
the terminal marked with the letter "E" or by the earth
symbol
or coloured green and yellow.
The wire coloured blue must be connected to the terminal
"N" or coloured black.
The wire coloured brown must be connected to the terminal
marked "L" or coloured red.
Upon completion there must be no cut, or stray strands of
wire present and the cord clamp must be secure over the
outer sheath.
Earth
Neutral
Live
GREEN & YELLOW
E
N
BLUE
CORD CLAMP
P1041
L
BROWN
13

Advertisement

loading

This manual is also suitable for:

Ecn 2247Ecn 2747Ecn 3147Ecn 4147Ecn 5147