Related Manuals for STL M-KMCT14
Summary of Contents for STL M-KMCT14
- Page 1 K-FORCE MICRO 14 ® MINI LIGHT BAR M-KMCT14 M-KMCL14 INSTRUCTION MANUAL SpeedTech Lights, Inc © 2019...
- Page 2 This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
- Page 3 Grommets, cable ties, looms, and other installation hardware should be used to anchor and protect all wiring. Fuses should be properly sized and located as close to the power take off points as possible to protect the wiring and device. To protect against short circuits, a fuse is included by STL for all products.
- Page 4 K-FORCE MICRO 14 ® MINI LIGHT BAR Wiring Diagram Wire Color Function Positive Red* Negative Black* Flash Pattern Yellow * Indicates a main power cable. NOTE: All cables except Negative contact +12 VDC. Specifications Voltage 12 VDC Amps < 3.5 Optic TIR / Linear LED Count...
- Page 5 K-FORCE MICRO 14 ® MINI LIGHT BAR Magnet Mounts (Included) • This unit comes included with magnetic mounting brackets pre-attached. • Magnet brackets are adjustable along the length of the aluminum track. • Ensure all four magnets are secured to a flat surface. Stud Mount (Sold Separately) •...
- Page 6 About Flash Patterns • All STL LED products are equipped with a non-volatile memory which will recall the last flash pattern when the Light Bar is turned on. • Set your flash pattern by pushing the Flash Pattern button on your Cigarette Lighter Plug to cycle through the various patterns.
Need help?
Do you have a question about the M-KMCT14 and is the answer not in the manual?
Questions and answers