Download Print this page

Troubleshooting; Unit Maintenance - Rio SALON LASER LAHC Information Manual

Scanning hair remover

Advertisement

Available languages

Available languages

© The Dezac Group 2011
TR O UBL ESHO O TING
I have lost my keys.
• Make a note of the serial number of your product from the
base of the unit and call our Customer Care on (0) +44 1242
702 345 who will be happy to send you a replacement key.
The lights on the unit are working but no laser is emitted
on pressing the button.
© The Dezac Group 2011
• Ensure the Touch Pins are making contact with the skin.
No lights are working on the unit.
• Ensure the Adapter plug is turned on at the wall and the
power lead is fully inserted in the back of the unit.
• If controls on either Main unit or Wand are left untouched for
20 minutes, the System will shut down. To restart, turn the
Key anticlockwise to the off position then restart the unit.
The unit is not responding and one of the power level
lights is flashing.
© The Dezac Group 2011
• This indicates a lockout. If you experience a 'lockout',
simply reset the unit by turning it off with the key. wait 5
seconds before turning the unit on again.
U NI T m A I NT ENA NCE
• After use always unplug the Adapter and store out of reach
of children.
• Only use this product with the Mains Adapter supplied.
• To protect the laser, do not store at temperatures exceeding
40ºC.
• While unplugged, regularly clean the Front Face of the Wand
and Touch Pins with a cotton bud, to ensure optimum laser
output.
• Do not immerse the Main unit or Wand in water.
• Always store the Wand on the Main unit and do not use it
for any other purpose than intended.
• After use, wipe the Wand clean with a slightly damp cloth.
The main Unit can also be wiped over.
• For laser efficiency, periodically clean the laser aperture with
a lint free cloth or cotton bud, ensuring no fibres are left.
• If you experience unexpected behaviour of this product then
it is possible some external electromagnetic interference is
responsible. You should remove this source and restart the
product to restore full operation. At no time will the laser fire
unintentionally.
• Do NOT dissemble or repair. If you have any problems
using the product, contact our Customer Care Department.
12
12

Advertisement

loading

This manual is also suitable for:

Salon laser lahc2