Table of Contents
Advertisement
30
1
2
6. Put one of the polystyrene packag-
ing elements on the floor behind
the appliance. Carefully put down
the appliance with the rear side on
it. Make sure not to damage the
hoses.
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical po-
sition.
9. Remove the power supply cable
and the drain hose from the hose
holders.
10. Remove the three bolts. Use the
key supplied with the appliance.
11. Pull out the plastic spacers.
Advertisement
Table of Contents
