Table of Contents
Advertisement
24
2
THE INLET HOSE FILTER AND
THE VALVE FILTER
It could be necessary to clean the filters
when:
• The appliance does not fill with wa-
ter.
• The appliance fills with the water for
a long time.
To clean the water inlet filters:
1
8. Clean the filter under the water tap
and put it back in the pump into
the special guides.
9. Make sure that you tighten correct-
ly the filter to prevent leakages.
10. Close the drain pump door.
• The indicator of button
and the display shows the related
alarm. Refer to 'Troubleshooting'.
WARNING!
Disconnect the mains plug from
the mains socket.
1. Close the water tap.
2. Remove the water inlet hose from
the water tap.
3. Clean the filter in the inlet hose
with a stiff brush.
4. Remove the inlet hose behind the
appliance.
5. Clean the filter in the valve with a
stiff brush or a towel.
4
flashes
Advertisement
Table of Contents
