Hygiene Intense function
(depends on the model)
Designed to be used when more hygiene
is required for washing the dishes. This
function increases the washing and rinsing
temperatures in the selected cycle and
extends the periods of these steps in the
cycle. Moreover, an additional rinsing cycle
is performed to wash and rinse your dishes
with more hygiene.
MaxiDry function
(depends on the model)
This function enables maximum level drying
performance.
TrayWash Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
Delay function
(depends on the model)
If there is an economic electricity tariff in
your area, you can use the delay function
to wash your dishes at respective hours.
You may delay the start time of the selected
program up to 24 hours.
1. With the door closed, press the delay
button after selecting the washing
program and other additional functions.
2. When you press the Delay button, "1h"
is displayed on the Display Information
Line and the Delay indicator starts
flashing.
3. Set the time you want by pressing the
delay button. Each time you press
the button, the time increases in 1
hour increments up to 24 hours. Long
pressing the delay button triggers
continuous hour increment.
4. Press the Start/Pause/Cancel key.
Program will start automatically when
the delay period is over.
Changing the settings with the delay
function is enabled
While the delay function is active, you
cannot make changes in the washing
program, additional functions or delay time.
Once the program has started, the
program and auxiliary functions cannot
be set/changed.
To cancel the delay function:
With the door closed, press the Program
Selection/Program Cancellation button
for 3 seconds. When the delay function
is disabled, you will return to the program
selection mode.
Fast+ Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Half Load function
(Depends on model)
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
With the Half Load function you can
save both water and power while using
the lower and upper baskets of the
machine.
33/EN