Spring Clips; Additional Tools - Countax Garden Tractor Owner's Handbook Manual

C series garden tractor
Table of Contents

Advertisement

Useful Information/Tips & Tricks - C Series Garden Tractor
TYRE SEALANT
Countax STRONGLY recommends that you treat all four
wheels with Tyre Sealant (available from your dealer). It
will greatly increase the life of your tyres and reduce the
risk of punctures, by protecting them from thorns and
debris on your lawn. SImply follow the instructions on
the bottle.

SPRING CLIPS

Before removing Spring Clips, be sure to 'un-lock' them by
twisting the two arms over each other (see illustration).
Then simply rotate them off the securing pin, a bit like
removing a key off a keyring.

ADDITIONAL TOOLS

Even though a toolkit is included with your C Series
Tractor, some maintenance and servicing jobs will require
additional tools. Always be sure that you use the correct
tools for the job, never use adjustable open-ended
spanners or ill-fitting screwdrivers; not only can these
damage the components of your tractor but they also can
prove dangerous should they slip.
Additional Tools You May Require:
Spring Balance/Belt Gauge
Ruler or Tape Measure
Torch
Battery Charger
7/16" Spanner & Socket
9/16" Spanner & Socket
1/2" Spanner & Socket
13mm Spanner & Socket
Screwdriver Set
Rubber Mallet
Funnel (with filter)
Spark Plug Gap Gauges
Petroleum Jelly
Pliers
Lifting Jack
Tyre Pressure Gauge
Foot Pump
Block of wood (for supporting the Deck when removing)
PUNCTURE PREVENTATIVE
TYRE SEALANT
Locked
Spanners & Sockets
7/16" Spanner/Socket
9/16" Spanner/Socket
1/2" Spanner/Socket
13mm Spanner
Un-Locked

Advertisement

Table of Contents
loading

This manual is also suitable for:

C-300C-38hC-550C400C600C800

Table of Contents