Table of Contents
Advertisement
OSD Message
a. Outline
b. The Description For OSD Message
Item
Auto Config
Please Wait
Input Not
Supported
Cable Not
Connected
No Signal
When Analog signal input, if User Press Hot-Key "Auto", will show this message, and the
monitor do the auto config function.
When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor
support range, will show this message. This message will be flying.
Analog-Only Model: When the video cable is not connected, will show this message.
This message will be flying.
Analog-Only Model: When the video cable is connected, but there is no active signal
input, will show this message, then enter power saving.
Description
27
Advertisement
Table of Contents
