Installation Instructions - NORPOLE NP2R User Manual

INSTALLATION INSTRUCTIONS

CAUTION: Read all instructions before installing
• Allow the unit to stand in place at least 24 hours after transporting or moving before plugging it in.
• Make sure that the unit has reached the desired operating temperature before loading product into it.
• Make sure that there is proper ventilation around the unit and in the space in which it will be used.
• Verify that all accessories (shelf clips, shelves, casters, etc.) are correctly installed and in place prior
to plugging in.
• Be sure to read the manual in its entirety before using the unit.
• Make sure that the unit is not resting on or against the electrical cord or plug.
INSTALLATION LOCATION
• Install the unit on a level surface that can support weight of the unit. Uneven surfaces may cause the
unit to make noises or not function properly.
• Install in an indoor, well-ventilated area. The unit will function more efficiently with proper ventilation.
ALWAYS allow for 4" of clearance in the back of the unit.
• This unit is not intended for outdoor use. Using it outdoors can result in decreased efficiency and
may cause the unit to malfunction or become damaged.
• DO NOT install in an area with high humidity or that is very dusty. Humidity can lead to rusting of the
components or surfaces, and dust can cause the condenser coil to malfunction. Be sure to clean the
condenser regularly, at least once a month, with a brush or clean cloth.
• DO NOT install the unit near any sources of heat or moisture generating equipment. High ambient
temperatures can cause the compressor to overwork, leading to higher energy consumption and
gradual breakdown of the unit.
NOTE: Installing the unit in an improper location or manner may result in failure of the unit, and could
void the warranty.
ELECTRICAL SUPPLY
ALWAYS make sure that the unit is plugged into a properly installed and grounded dedicated outlet that
meets the requirements listed on the ratings label and that has appropriate overcurrent protection. Voltage
that is too high or too low can detrimentally affect the operation of, or damage, the unit. DO NOT modify or
cut the power cord, or use any other plug or an extension cord.
5