Table of Contents
Advertisement
Audio Jack Configurations:
Jack
Center/Subwoofer Speaker Out
Rear Speaker Out
Line In/Side Speaker Out
Line Out/Front Speaker Out
Mic In/Side Speaker Out
You can change the functionality of an audio jack using the audio software. If you want to install a
Side Speaker, you need to retask either the Line in or Mic in jack to be Side Speaker out through
the audio driver.
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Please visit GIGABYTE's website for details on configuring the audio software.
Headphone/
4-channel
2-channel
a
a
a
- 12 -
5.1-channel
7.1-channel
a
a
a
a
a
a
a
a
Advertisement
Table of Contents
