Time Zone
The DVB standard broadcast time and date is for the GMT time zone. In order to display the local time correctly,
you must set the local time zone.
Note: If daylight savings is enabled then the receiver is changing automatically the time on the following
condition (valid for Europe with no time limit).
•
summer times begins and ends at 1:00 am universal time (Greenwich mean time)
•
it begins the last Sunday in March
•
it ends the last Sunday in October.
This is done in disregard of DVB broadcasted information.
LanguageS
Use this option to set your preferred language for the on-screen menus, primary and secondary subtitling and
soundtracks languages.
paRenTaL ConTRoL
Not all TV and radio programmes are suitable for listeners or viewers of all age groups. The digital receiver
therefore provides an active parental control (lock) function, allowing you to block individual channels by means of
a four-digit security PIN code (Personal Identification
Number) or restrict content viewing based on
restriction rating data if available with the program
broadcast. The default PIN is '1111'. Use the Change
PIN option to set a new PIN any time.
Note: In case you forget your pin code, call customer
service.
neTWoRK SeTTIngS
The receiver can connect to the internet through your
home network router or DSL/cable modem. Connec-
tion to the internet allows you to access internet-
based content, applications and services offered by the broadcasters or over the public internet. Use "LAN" if the
receiver is connected to your home network over the Ethernet port or WLAN if it connects to a wireless router in
your home network.
CHanneL SeaRCH
The receiver supports automatic and advanced
channel search modes. The automatic channel
search was described under the chapter of "the
installation wizard". The following section focuses on
the advanced channel search which is a customized
search mode.
Advanced channel search
The advanced channel search allows you to make a
channel search with customized search parameters.
Satellite
Use this option to select which satellite to search.
Frequency
Use this option to set the frequency of the transponder to search.
Polarity
Use this option to set the polarisation of the signal between horizontal,
vertical, right and left circular.
Symbol rate
Use this option to set the symbol rate for the signal.
FEC
Use this option to set the FEC (Forward Error Correction).
16
Need help?
Do you have a question about the WOLKS BOX IDL 6650n Web Edition and is the answer not in the manual?
Questions and answers