Repeat Playback; Programme Setting; Programme Cancel; Aux Operation - JVC RD-D228H Instruction Manual

Repeat Playback

1. Press MODE/ST/MONO once, "
current track repeatedly.
2. Press MODE/ST/MONO twice, "
tracks repeatedly.
3. Press MODE/ST/MONO three times, "RAN" will show in the display. The CD will play all
tracks randomly.
4. Press MODE/ST/MONO once more and the repeat function will turn off.

Programme Setting

The user can program up to 20 tracks in CD mode in any desired order.
1. Make sure the disc is not playing.
2. Press PRESET to enter programme mode.
3. Press SKIP+/SKIP– buttons to select the track that you want to preset.
4. Press PRESET to confirm the track.
5. Repeat steps 2-4 to program more tracks. Once it is completed, press the PLAY/PAUSE/
STOP button to start playback of the programmed tracks.

Programme Cancel

Press PLAY/PAUSE/STOP button twice, or open the CD tray door and close it again to erase
the memory.

AUX Operation

There is AUX IN socket located at the top of the unit. Analogue audio sound signals from
other sources can be connected to the unit through the socket.
1. Connect to another audio device using the AUX IN socket via a 3.5 mm stereo audio
cable.
2. While in the ON mode, press the SOURCE button repeatedly to select AUX mode.
3. Press Volume +/– button to adjust the volume to your desired level.
4. In AUX mode, operate your audio device directly for playback features.
1" will show on the display. The CD will play the
ALL" will show on the display. The CD will play all
15