User Manual Flic Twist Contents About the Product Getting started Connecting your Twist Bluetooth connection Mounting your Twist Cleaning the adhesive Changing the battery Factory reset Problems Compliance Handling the battery Safety usage guidelines Warranty Notice...
When rotating you can adjust brightness, color, or saturation simultaneously. Sequence the lights and even add events. 3. Scene Blender Flic Twist's innovative Scene Blender mode allows you to preset up to 4 different light scenes. 4. Selector The Selector allows you to select up to 12 custom things to Activate or Adjust. Each...
1. An iOS or Android device with at least Bluetooth 4.0+ 2. Active internet connection 3. The Flic app, available on the App Store or Google Play 4. A Flic Twist (“Twist”) For up-to-date requirements and further information visit https://flic.io/start...
2. Make sure Bluetooth is activated on your phone. 3. Open the Flic App, create an account, and log in. 4. Connect the desired Flic Hub, in which you will add your Twist. 5. Follow the setup guide in the app to get your Twist paired.
Bluetooth Connection When setting the Twist up make sure to connect to your device through the Flic App. ● iOS users: Make sure you have both Bluetooth activated on your device and WiFi connected. ● Android users: Make sure you have Bluetooth activated on your device.
Twist as shown below. Then, remove the second protective layer and stick your Twist onto any clean surface. If you want to change the position of your Twist, twist the button to the right in order to exert horizontal force which makes it easier to remove the adhesive from the surface.
3. Give it a gentle rub and repeat the wash. 4. Leave it to air-dry and it will return to full stickiness. 5. Stick the adhesive on the Twist again. Flic Twist is not waterproof. Make sure you don’t put the Twist underwater. Read more under safety usage guidelines.
Changing the battery Flic Twist comes with two replaceable AAA batteries that last up to 2 years. To assemble or change the battery you will need to follow these steps: 1. Open the battery hatch with a flat-headed tool such as a flathead screwdriver.
1. Remove the battery, see the page “Changing the battery”. 2. Insert the battery. Within 5 seconds push and hold the button for 10 seconds. By pushing the button, all your settings will be lost and the Twist will return to default.
Alternatively, you can contact us via support@flic.io Compliance Shortcut Lab’s declaration of conformity is available at https://flic.io/doc For full compliance, list visit https://flic.io/compliance Flic Twist is certified as FCC, IC, CE, AUS, R-NZ and WEEE, Prop 65 RoHS, REACH compliant.
Handling the battery The Twist has been designed with replaceable AAA batteries that last up to 2 years. Twist also supports rechargeable AAA batteries in order to reduce the need for disposable batteries. The AAA Battery is composed of alkaline.
Safety usage guidelines The Twist is not a toy. It contains small parts and accessories that present a choking hazard as such it is not suitable for children or pets. General Do not attempt to service the product. Do not use the product in temperatures below -10°C or above +40 °C.
Warranty Shortcut Labs AB warrants that your Flic hardware product (“the product”) will be free from defects in materials and workmanship for 24 months from the date of delivery to the original retail purchaser (“the warranty period”). If a defect in the product arises within the warranty period, Shortcut Labs will,...
Notice Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.
Page 15
Join us! https://community.flic.io/ Share your ideas with other Flic users and keep up to date with the latest news and happenings from the Flic team. Shortcut Labs AB, Drottning Kristinas Väg 41, 11428, Stockholm, Sweden...