Service Bracket - Lenovo ThinkPad P16 Gen 2 User Manual

4. Turn the computer over and tighten the screws to secure the keyboard.
5. Connect the ac power adapter and all disconnected cables to the computer.

Service bracket

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Attention: Do not touch the contact edge of the memory module. Otherwise, the memory module might get
damaged.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 47.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the keyboard. See "Keyboard" on page 49.
and print the following instructions.
Chapter 6
. 53
CRU replacement