LG LSWD307ST.BSTLSTD Owner's Manual page 29

NOTE
• The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
• If the appliance cannot be registered due to
problems with the wireless signal transmission,
unplug the appliance and wait about a minute
before trying again.
• If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to WEP,
network setup may fail. Change the security
protocol (WPA2 is recommended), and register the
product again.
INSTALLING THE LG THINQ
APPLICATION
Search for the LG ThinQ application from the Google
Play Store or Apple App Store on a smartphone. Follow
instructions to download and install the application.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL and To
obtain the source code under GPL, LGPL, MPL, and other
open source licenses, that is contained in this product,
please visit http://opensource.lge.com. In addition to
the source code, all referred license terms, warranty
disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and
handling) upon email request to opensource@lge.com.
This offer is valid for three (3) years from the date on which
you purchased the product.
Wireless module Specificatons
Frequency Range
Output Power (max.)
29
SMARt fUNctIONS
2412~2462 MHz
< 30 dBm