Honda PASSPORT 2020 Owner's Manual page 67

Tether Strap Hook
3. Slide the seat forward.
4. Put the outer head restraint to it's
Anchor
3. Slide the seat forward.
4. Put the center head restraint to it's lowest
5. Tighten the tether strap as instructed by the
6. Slide the seat backward.
7. Make sure the child seat is firmly secured by
8. Make sure any unused seat belt that a child
Outer positions
uppermost position, then route the tether
strap between the head restraint legs, and
secure the tether strap hook onto the
anchor.
Make sure the strap is not twisted.
Center position
position, then route the tether strap over
the top of the head restraint and secure the
tether strap hook onto the anchor.
Make sure the strap is not twisted.
All positions
child seat manufacturer.
rocking it forward and back and side to
side; little movement should be felt.
can reach is buckled, the lockable retractor
is activated, and the belt is fully retracted
and locked.
2 Protecting Child Passengers P. 58
uuChild SafetyuSafety of Infants and Small Children
1Installing a LATCH-Compatible Child Seat
WARNING
3
Never attach two child seats to the same
anchor. In a collision, one anchor may not
be strong enough to hold two child seat
attachments and may break, causing
serious injury or death.
For your child's safety, when using a child seat
installed using the LATCH system, make sure that the
child seat is properly secured to the vehicle. A child
seat that is not properly secured will not adequately
protect a child in a crash and may cause injury to the
child or other vehicle occupants.
Continued 65