Honda PASSPORT 2020 Owner's Manual page 461

■
Starting to Drive
When the engine was started using the smart entry remote
1. Depress the brake pedal and press the ENGINE START/STOP button
simultaneously.
When the engine was started in any case
2. Keeping your right foot on the brake pedal, release the parking brake. Check that
the parking brake and brake system indicator has gone off.
2 Parking Brake P. 537
3. Put the transmission into D . Select
(
4. Gradually release the brake pedal and gently depress the accelerator pedal to pull
away.
■
Hill start assist system
Hill start assist keeps the brake engaged briefly to help prevent the vehicle from
rolling on inclines as you move your foot from the brake pedal to the accelerator.
Put the transmission into D or
(
then release the brake pedal.
R when reversing.
(
S when facing uphill, or R when facing downhill,
( (
uuWhen DrivinguStarting the Engine
1Starting to Drive
When the engine was started using the smart entry
remote
The engine stops when the transmission position is
changed from before the ENGINE START/STOP
( P
button is pressed. Follow step 1 when starting to
drive.
1Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very steep or slippery slope, and
will not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
Hill start assist will operate even when VSA® is
switched off.
459