Table of Contents
Advertisement
7-50
Infotainment System
3. Say Change phone.
If another cell phone is
found, the response will be
<Phone name> is now
connected.
If another cell phone is not
found, the original phone
remains connected.
Storing and Deleting Phone
Numbers
The system can store up to
30 phone numbers as name tags in
the Hands Free Directory that is
shared between the Bluetooth and
OnStar systems, if equipped.
The following commands are used
to delete and store phone numbers.
Store: This command will store a
phone number, or a group of
numbers as a name tag.
All manuals and user guides at all-guides.com
Digit Store: This command allows
a phone number to be stored as a
name tag by entering the digits one
at a time.
Delete: This command is used to
delete individual name tags.
Delete All Name Tags: This
command deletes all stored name
tags in the Hands Free Calling
Directory and the OnStar
Turn by Turn Destinations Directory,
if equipped.
Using the Store Command
1. Press and hold
two seconds.
2. Say Store.
3. Say the phone number or group
of numbers you want to store all
at once with no pauses, then
follow the directions given by the
system to save a name tag for
this number.
Using the Digit Store Command
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press and hold
two seconds.
2. Say Digit Store.
3. Say each digit, one at a time,
that you want to store. After
for
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered, say
Store, and then follow the
directions given by the system to
save a name tag for this number.
for
Advertisement
Chapters
Table of Contents
