Yamaha MusicCast VAR 40 Owner's Manual page 14

Part names and functions of the remote control
The part names and functions of the supplied remote control are as follows.
a
b
c
d
e
f
g
h
z (power) button
1
Turn on/off the unit.
Turned on
The indicator for the last input source selected
i
glows.
Turned off/network standby (p.45)
j
Favorites (1-3) buttons
2
Register input sources via a network
(Internet radio stations, music files stored on
a media server) as favorites with the
k
FAVORITE button (p.35).
l
Input buttons
3
m
Select an input source to be played back.
• HDMI : Sound from a device connected to
the HDMI IN jack (p.18)
• TV : TV audio (p.16)
• ANALOG : Sound from a device
connected to the ANALOG input jack
(p.18)
• BLUETOOTH : Sound from a Bluetooth
device (p.31)
• NET : Audio acquired via a network
(p.26)
14
En
SURROUND button
4
Switch to surround playback (p.29).
3D SURROUND button
5
Switch to 3D surround playback (p.29).
SUBWOOFER (+/-) button
6
Adjust the volume of an external subwoofer
connected to the unit (p.26).
CLEAR VOICE button
7
Enable/disable the clear voice function
(p.30).
INFO button
8
Confirm the type of audio signal being
played, as well as settings for functions such
as the bass extension function (p.34).
STEREO button
9
Switch to stereo (2-channel) playback
(p.29).
VOLUME (+/-) button
:
Adjust the volume of the unit (p.26).
| (mute) button
A
Mute the audio output (p.26). Press the key
again to unmute.
BASS EXTENSION button
B
Enable/disable the bass extension function
(p.30).
DIMMER button
C
Change the brightness of the indicators
(p.42).