Break-In Period; Maintenance Log - DUROMAX Hybrid Elite XP13000EH User Manual

Break-In Period

As the best practice for any new combustion motor it's recommended to perform the break
in procedure as follows:
● Run the generator for the first 6-8 hours on conventional oil, then change the oil. After
the break-in period synthetic oil may be used.
● During the break in period of the first 6-8 hours keep the generator load under 50%
for optimal results.
● Check and clean the air filter if necessary after the break-in period.

Maintenance Log

As a best practice it's recommended to keep a log of the generator hours and maintenance to
ensure your generator is always operating to its full potential.
Date Generator Hours Maintenance Performed
53