Table of Contents
Advertisement
Item
Controls & Connectors
1
Multi-purpose USB Type-C
2
Charging light
™
3
HDMI
connector
4
USB port (always-on)
5
Combo audio jack
6
Novo button hole
7
Battery charging/State light
Battery charging/State light and its indication
When the computer is turned on or in sleep mode, the status of the battery charging light provides clues to
the battery charging level and whether the computer is plugged into an electrical outlet.
Description
®
connector
• The multi-purpose connector is designed as the
primary power input connector which is marked with
can also be used to connect:
– devices that utilize the USB data transfer
– display devices
• The multi-purpose connector is Thunderbolt
enabled which is marked with . When connected with
a Thunderbolt enabled device, data transfer may be
established in Thunderbolt mode. It can also be used
to connect display devices and devices that utilize the
USB data transfer technology.
Note: When connecting display devices, you need to use
appropriate cables and adapters (if needed) according to
the connection capabilities of the display device.
Indicate whether the computer is connected to ac power.
• Solid white: Connected to ac power; battery capacity
91%–100%
• Solid amber: Connected to ac power; battery capacity
1%–90%
• Off: Not connected to ac power
Connect to a compatible digital audio device or video
monitor, such as an HDTV.
This USB port utilizes the USB Standard-A connector. It
supports SuperSpeed USB 5 Gbps and is backwards
compatible with USB 2.0. The always-on connector can
charge external devices when the computer is turned off,
in sleep or hibernation mode. The always-on function can
be turned on or off in the UEFI/BIOS setup utility.
Note: If Lenovo Vantage is pre-installed on your
computer, you can also set always-on function within that
software.
Connect to headphones or headsets with a 3.5 mm (0.14
inch), 4-pole plug.
Note: This jack does not support standalone external
microphones. If you use headsets, choose one with a
single plug.
Press the Novo button to open the Novo Button menu.
From the menu, you can choose to open the UEFI/BIOS
setup utility, the Boot menu, or the Windows startup
options screen.
This light varies by model and is either a battery charging
light or a state light.
. When not connected with the power adapter, it
technology
Chapter 1
™
4
.
5
Meet your computer
Advertisement
Table of Contents
