ZyXEL Communications VPN Series Handbook page 804

www.zyxel.com
4. Configure the IP Address Pool for the client
The IP address pool will auto select none use subnet on the device to avoid to set up
the same subnet on the device. The auto IP address Pool will begin at 192.168.50.1
If there is 192.168.50.1 subnet exist in the settings, the IP address pool will change to
192.168.51.1 subnet.
Note: The Subnet only detect the subnet mask is under /24, if the subnet is not /24, it will
not detect it.
804/810