TABLE OF CONTENTS Safety First ..........................2 Product & Installation Overview ...................3 Suggested Tools and Supplies ....................4 Parts Included List ........................5 Parts Included Illustration .....................6 Tank Penetration ........................7 Stretcher Bar Assembly......................10 Suspension Chains and Power Cable .................11 Mixer Maintenance Recommendations ................12 Mixer Warranty ........................13 Non-warranty Repairs ......................14 Repair Contact Form ......................15...
Back to Contents SAFETY FIRST IMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE WARNINGS: Moving Machinery Shock Hazard • Under NO circumstances should anyone enter the water with the mixer connected or in operation. • Running the unit out of water will create a dangerous situation and damage the seals. •...
• Please consult your CertiSafe™ sales representative for mixer mount placement, retrieval, and inspection requirements. Some parts will arrive pre-assembled from Kasco; however, all assembly steps are listed for reference. This manual contains information for the SM-50 Suspended Mount. SM-50...
Back to Contents SUGGESTED TOOLS AND SUPPLIES 7/16” socket Electric or cordless drill K (.281”) drill bit wrench Half-round metal file Pan to catch shavings 1/8” Allen wrench 9mm wrench 7/16” wrench Side cutter Adjustable pliers Included supplies: • 1-3/8” hole saw •...
Back to Contents PARTS INCLUDED LIST Assembly Item Description Part No. Mount Stretcher bar (30 in.) 997311 Jaw slide 997206 1/4”-20 x 1/2” shoulder screw 451112 1/4”-20 x 3/4” shoulder screw 451110 1/4”-20 nylon locknut 566212 1/4” flat washer 566208 Long chain (25 ft.) 636384 Short chain...
Back to Contents TANK PENETRATION 1. Fit a flat washer (L) and then the sealing washer (M) onto the eye bolt (J). 2. From the tank interior, insert the eye bolt (J) with washers (L, M) through the 3/8” hole. 3.
Page 9
Back to Contents TANK PENETRATION (CONT.) • The maximum tank roof thickness accommodated by the tank penetration parts included is 1-1/4”. • Suggested measurements are based on a 24” square access hatch. 7. Use the provided hole saw to drill a 1-3/8” clearance hole through the tank at a location conveniently reached from the tank hatch.
Page 10
Back to Contents TANK PENETRATION (CONT.) 11. Thread the cord grip (T) onto the tank 12. Secure the connecting link (N) to the relief hanger. penetration base. Leave cord grip loose. 13. Attach the cable support (V) to the connecting link and tighten the link.
Back to Contents STRETCHER BAR ASSEMBLY 1. Insert the end link of a short chain (H) between the mixer cage loops on one side of the cage. 2. Secure the chain (H) with a shoulder screw (D), two washers (F), and locknut (E). 3.
Back to Contents SUSPENSION CHAINS AND POWER CABLE 1. Insert one end link of a long chain (G) into an outer jaw slide (B) placed at the end of the stretcher bar. 2. Secure with a shoulder screw (C) and locknut (E). 3.
• Replacing the seal and changing the oil every 3-5 years will add reliability and longevity to the mixer. • Seal replacement and all other repair services should be performed by Kasco Marine. Electrical Troubleshooting • If a unit fails to operate, you can use a series of simple checks to determine the general cause.
(for return delivery of the repaired unit), daytime phone number, and an e-mail address for correspondence regarding the warranty claim. Any expedited shipping method for the return of the unit is at the customer’s expense. Kasco Marine will return units repaired under warranty at our expense via ground freight within the continental United States.
This request should include a daytime phone number and e-mail address. Estimate options are as follows: • Kasco contacts the customer with a repair total after we evaluate the unit, but before we perform the work quoted. •...
Back to Contents REPAIR CONTACT FORM • Kasco requires that all equipment sent for repair MUST be accompanied by this form and marked to Repairs attention. Kasco Marine • Unit should be cleaned before shipping. 800 Deere Road • Kasco is NOT responsible for shipping damage accrued in Prescott, WI 54021 return shipment.