ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
www.aeg.com 1.2 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 5
ENGLISH • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Service • Contact the Authorised Service Centre to repair the appliance.
ENGLISH 4.1 Indicators Indicator Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. 5. PROGRAMMES Programme Degree of soil Programme phases Options Type of load • Normal soil •...
www.aeg.com 5.1 Consumption values Water Energy Duration Programme (kWh) (min) 0.932 7 - 12 0.6 - 1.4 40 - 150 13 - 15 1.3 - 1.5 140 - 160 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
Page 9
ENGLISH The higher the content of these minerals, your area. Your local water authority can the harder your water is. Water hardness advise you on the hardness of the water is measured in equivalent scales. in your area. It is important to set the right level of the water softener to assure The water softener should be adjusted good washing results.
www.aeg.com How to deactivate the rinse There is also an acoustic signal that sounds when the programme is aid dispenser completed. By default this acoustic signal is deactivated but it is possible to The appliance must be in programme activate it. selection mode.
ENGLISH 7.2 TimeSaver How to activate TimeSaver This option increases the pressure and Press TimeSaver, the related indicator the temperature of the water. The comes on. washing and the drying phases are If the option is not applicable to the shorter.
www.aeg.com 8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
Page 13
ENGLISH Starting a programme with delay start 1. Set a programme. 2. Press again and again until the display shows the delay time you want to set (from 1 to 24 hours). The delay indicator comes on. 3. Close the appliance door to start the countdown.
www.aeg.com automatically deactivate the appliance. 2. Close the water tap. 10. HINTS AND TIPS 10.1 General • If you use multi-tablets you can select the Multitab option (if available). This The following hints will ensure optimal option increases the cleaning and cleaning and drying results in daily use drying results with the use of multi- and also help to protect the...
ENGLISH • Put hollow items (cups, glasses and • The spray arms are not clogged. pans) with the opening down. • There is dishwasher salt and rinse aid • Make sure that cutlery and dishes do (unless you use multi- tablets). not bond together.
Page 16
www.aeg.com 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 4.
ENGLISH • If you regularly use short duration inside the appliance. To prevent this, programmes, these can leave we recommend to run long duration deposits of grease and limescale programmes at least 2 times per month. 12. TROUBLESHOOTING If the appliance does not start or it stops With some problems, the display during operation.
www.aeg.com 12.1 The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks or • The release quantity of rinse aid is too much. Adjust bluish layers on glasses and the rinse aid selector to a lower position. dishes.