Table of Contents
Advertisement
26
Care and cleaning
6.
When no more water comes out, un-
screw the pump and remove it. Always
keep a rag nearby to dry up spillage of
water when removing the pump.
7.
Remove any objects from the pump impeller by rotating it.
8.
Put the cap back on the emergency emp-
tying hose and place the latter back in
its seat.
9.
Screw the pump fully in.
10. Close the pump door.
WARNING!
When the appliance is in use and depending on the programme selected there can be hot
water in the pump. Never remove the pump cover during a wash cycle, always wait until
the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is
securely retightened so as to stop leaks and young children being able to remove it.
Cleaning the water inlet filters
If the appliance doesn't fill, takes long to fill water, the starting button blinks yellow or the
display (if available) shows the relevant alarm (see chapter "What to do if..." for more details),
check if the water inlet filters are blocked .
To clean the water inlet filters:
Advertisement
Table of Contents
