Honda PILOT 2020 Owner's Manual page 584

uuHonda Sensing®uAdaptive Cruise Control (ACC)
■
To Set the Vehicle Speed
On when
adaptive cruise
control begins
Take your foot off the pedal and press the –/SET button when you reach the desired
speed. The moment you release the –/SET button, the set speed is fixed, and ACC
begins.
Set Vehicle
Speed
582
When ACC starts operating, the vehicle icon,
Set Vehicle
distance bars and set speed appear on the
Interval
driver information interface.
1Adaptive Cruise Control (ACC)
ACC may not work properly under certain conditions.
–/SET Button
When not using ACC: Turn off adaptive cruise by
pressing the MAIN button. This also will turn off the
Lane Keeping Assist System (LKAS).
When the MAIN button is pressed, ACC and Lane
Keeping Assist System (LKAS) are both turned on or
off.
Press and release
You can switch the displayed set speed
measurements on the driver information interface
between mph and km/h.
Do not use ACC under the following conditions:
•
•
•
•
2 ACC Conditions and Limitations P. 585
2 Units P. 120
On roads with heavy traffic or while driving in
continuous stop and go traffic.
On roads with sharp turns.
On roads with steep downhill sections, as the set
vehicle speed can be exceeded by coasting. In such
cases, ACC will not apply the brakes to maintain
the set speed.
On roads with toll collection facilities or other
objects between lanes of traffic, or in parking
areas, or facilities with drive through access.