Honda PILOT 2020 Owner's Manual page 203

■
Changing the Second Row
Restraint Position
■
Removing and Reinstalling the Head Restraints
Except third row outer seat head restraints
Head restraints can be removed for cleaning or repair.
To remove a head restraint:
Front and second row outer seat head restraint
Pull the restraint up as far as it will go. Then push the release button, and pull the
restraint up and out.
Second row/third row center seat head restraint
Pull the restraint up as far as it will go. Then push the release buttons which are
located on the both legs at the same time, and pull the restraint up and out.
* Not available on all models
*
/Third Row Center Seat Head
A passenger sitting in the second and third
row center seating position should adjust the
height of their head restraint to an
appropriate position before the vehicle begins
moving.
To raise the head restraint:
Pull it upward.
To lower the head restraint:
Push it down while pressing the release
button(s).
uuAdjusting the SeatsuHead Restraints
1Removing and Reinstalling the Head Restraints
WARNING
3
Failure to reinstall, or correctly reinstall, the
head restraints can result in severe injury
during a crash.
Always replace the head restraints before
driving.
Continued 201