Inserting The Containers For Oil And Uv Additive - Waeco AirCon Service Center ASC 5300 G Operating Manual

ASC 5300 G
7.8

Inserting the containers for oil and UV additive

I
NOTE
Only use approved oils and UV additive for R-1234yf. Observe the
manufacturer's instructions.
The current supply quantities are displayed in the standby menu.
1. Push the containers into the snap locks:
– Container for fresh oil (17)
– Container for UV additive (18) and
– Drained oil receptacle (19)
2. Enter the container size for fresh oil and UV contrast agent (see
chapter "Entering the container size" on page 86).
EN
17
18
19
Initial start-up
85