AEG FAVORIT 65042 U User Manual page 25

German
degrees
(°dH)
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
2. Press and hold, at the same time, De-
lay and Start until the indicators of
,
start to flash.
3. Press Program,
• The indicators of
go off.
Water hardness
French mmol/l
degrees
(°fH)
< 7 < 0.7
and
and
Clarke
degrees
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicator of
ues to flash.
• The display shows the current set-
ting of the water softener. E.g.
= level 5.
4. Press Program again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH
25
Water softener
adjustment
Manual Elec-
tronic
2) 2)
1 1
contin-