Table of Contents
Advertisement
Operations
08 Wrinkle Prevent
09 Adjust Time
10 Mixed Load Bell
11 POWER
12 START/PAUSE
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.
Do not put objects on the dryer, especially on the feature panel.
CAUTION
Do not spray water to the feature panel. This may cause a system failure.
32
English
DC68-03170X-09_IB_DV8650M_EN.indd 32
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent cycle.
You can change the set time for the selected cycle. This is
available only with TIME DRY, QUICK DRY, AIR FLUFF, and
WRINKLE AWAY. To change the cycle time, press Adjust Time
or Adjust Time
until the desired time is displayed.
The Mixed Load Bell notifies you when the average dry level in
a load is damp dry (80 % dried). This lets you take items that you
don't want fully dried or that dry quickly out of the dryer early
while letting others continue to dry.
You can select this option in all Sensor Dry cycles except for
AIR FLUFF, ACTIVE WEAR, TIME DRY, QUICK DRY, REFRESH,
WRINKLE AWAY, and STEAM SANITIZE. Available dry levels are
Normal Dry, More Dry, and Very Dry.
Press to turn on/turn off the dryer.
Press and hold to start operation, or press to stop operation.
2023-06-28
5:20:44
Advertisement
Table of Contents
