Samsung DVG52M7750V User Manual
Hide thumbs
Also See for DVG52M7750V:
- User manual (168 pages) ,
- User manual (168 pages) ,
- User manual (168 pages)
Related Manuals for Samsung DVG52M7750V
Summary of Contents for Samsung DVG52M7750V
- Page 1 Dryer User manual DVE(G)52M775** DC68-03170Y-10_IB_DV7750M_EN_R.indd 1 DC68-03170Y-10_IB_DV7750M_EN_R.indd 1 2023-06-30 2023-06-30 3:25:28 3:25:28...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions Installation requirements Key installation requirements Location considerations Ducting requirements Exhausting requirements Gas requirements Electrical requirements Installation What’s included Step-by-step installation Vent blockage test... - Page 3 Maintenance Vent sensor (applicable models only) Cleaning Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet Cycle chart English 3 DC68-03170Y-10_IB_DV7750M_EN_R.indd 3 DC68-03170Y-10_IB_DV7750M_EN_R.indd 3 2023-06-30 2023-06-30 3:25:31 3:25:31...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. - Page 5 Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it. WARNING - Risk of Fire •...
- Page 6 Safety information WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these...
- Page 7 WARNING - Fire or explosion hazard • Failure to follow safety warnings exactly could result in serious injury, death or property damage. • Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance.
- Page 8 Safety information WARNING - What to do if you smell gas: • Do not try to light any appliance. • Do not turn on the appliance. • Do not touch any electrical switch. • Do not use any phone in your building. •...
-
Page 9: California Proposition 65 Warning
CALIFORNIA PROPOSITION 65 WARNING WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using this appliance. Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. - Page 10 Safety information 13. Do not use heat to dry articles containing foam rubber or similarly textured rubber- like materials. 14. Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt. 15. The interior of the appliance and exhaust duct should be cleaned periodically by qualified service personnel.
-
Page 11: Warnings
Warnings WARNING • Ensure pockets are free of small, irregularly shaped hard objects and foreign material, i.e. coins, knives, pins, etc. These objects could damage your dryer. • Gas leaks may occur in your system, resulting in a dangerous situation. Cautions CAUTION •... - Page 12 Safety information • Do not place items in your dryer that have been spotted or soaked with vegetable oil or cooking oil. Even after being washed, these items may contain significant amounts of these oils. • Residual oil on clothing can ignite spontaneoulsy. The potential for spontaneous combustion increases when items containing vegetable oil or cooking oil are exposed to heat.
-
Page 13: Installation Requirements
Installation requirements Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. -
Page 14: Ducting Requirements
Installation requirements Ducting requirements Recommended Use only for short-run installation Weather hood type 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° Rigid Rigid elbows 80 ft. (24.4 m) 74 ft. (22.6 m) 68 ft. (20.7 m) 62 ft. (18.9 m) 57 ft. -
Page 15: Exhausting Requirements
Exhausting requirements Outside the United States and Canada The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl • Refer to the local codes. space, or a concealed space of a building. WARNING Exhausting the dryer to the outside will •... -
Page 16: Gas Requirements
Installation requirements Gas requirements WARNING • Your dryer must be disconnected from the gas supply pipe system during any pressure • Use only natural or LP (liquid propane) testing of the system at pressures greater gases. than 1/2 psi (3.5 kPa). •... -
Page 17: Electrical Requirements
Electrical requirements Grounding The wiring diagram is located on the plate under the control panel or rear frame. This dryer must be grounded. In the event of malfunction or breakdown, the ground WARNING will reduce the risk of electrical shock by •... - Page 18 Installation requirements Electric models Electric models – U.S. only Most U.S. dryers require a 120 / 240 volt, WARNING 60 Hz AC approved electrical service. • Your dryer has an optional cord with Some require 120 / 208 volt, 60 Hz an equipment-grounding conductor approved electrical service.
- Page 19 Electric models – Canada Only A 120 / 240 volt, 60 Hz AC approved electrical service fused through a 30-ampere fuse or circuit breaker on both sides of the line is required. NOTE All Canadian models are shipped with the power cord attached. The power cord should be plugged into a 30-ampere receptacle.
-
Page 20: Installation
What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the accessories, contact a local Samsung customer center or the retailer. Dryer at a glance 01 Control panel... - Page 21 Accessories & tools Provided accessories Y connector Water hose Short water hose (Canadian elec. models only) Required tools Pliers Cutting knife Pipe wrench (gas Nut driver models only) Level Philips screwdriver Duct tape Wrench LPG-safe compound or Teflon Tape (for gas installation) WARNING Packing materials can be dangerous to children.
-
Page 22: Step-By-Step Installation
Installation Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Install the exhaust system 1. Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer. - Page 23 STEP 3 Connect the electrical wiring First, read through the “Electrical requirements” section, and follow these steps. 3-wire system 1. Loosen or remove the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block.
- Page 24 Installation 4-wire system 1. Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • To connect the ground wire to the neutral position without through F (N) contact A (cabinet ground), contact a technician.
- Page 25 • Remove the terminal block cover plate. Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block. • A strain relief must be used. Do not loosen the nuts already installed on the terminal block.
- Page 26 Installation Using the short hose as an extension 1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling manually until it is tight.
- Page 27 STEP 5 Level the dryer To ensure optimal performance, the dryer must be level. 1. Using a level (A), check if the dryer is level side to side and then front to back. If the dryer is not level, adjust the leveling feet (B) at the bottom of the dryer.
-
Page 28: Vent Blockage Test
Installation STEP 6 Power on (Gas models) Make sure all gas connections, the exhaust line, and all wiring is connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 7 below. STEP 7 Final check When installation is complete, confirm that: •... - Page 29 Running the vent blockage test 1. Make sure the drum is empty, and then close the door. (If there are any clothes or other items in the drum, the test will not give accurate results.) 2. Press the POWER button to turn the dryer on, then simultaneously press and hold the Adjust Time and Dry Level buttons for 3 seconds.
-
Page 30: Exhaust Ducting Guide
Installation Exhaust ducting guide Ducting 1. Make sure the dryer is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping screws. 3. To facilitate the exhaust, keep the ducts as straight as possible. Cleaning Clean all old ducts before installing the dryer, and make sure the vent flap opens and closes freely. - Page 31 3. Remove the two screws from the lever holder, and then remove the holder cover. 4. Put the lever holder on the other side as shown, and then tighten the screws. Install the holder cover on the opposite side as shown. 5.
- Page 32 Installation 7. Remove the glass holder, and switch the positions of: a. the hinge cover and the door handle. b. the hinge holder and the glass-guide holder 8. Remove the door lever, and then move it to the other side as shown. 9.
-
Page 33: Before You Start
Before you start Here are a few things you should know before starting your dryer. Sort and load • Put one wash load in the dryer at a • Overloading reduces the tumbling time. performance, resulting in uneven • Do not mix heavy and lightweight items drying and wrinkling. -
Page 34: Operations
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the “Safety information“ before operating this appliance. Feature panel DVE(G)52M7750* DVE(G)52M7755* Turn the cycle selector to select a desired cycle. When a cycle is 01 Cycle Selector selected, the cycle indicator lights up. - Page 35 Press to adjust the dryness in the Sensor Dry and Steam Cycles. The corresponding indicator turns on. • Larger or bulkier loads may require Very Dry or More Dry for complete dryness. • Less Dry is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
- Page 36 Operations The Mixed Load Bell notifies you when the average dry level in a load is damp dry (80 % dried). This lets you take items that you don’t want fully dried or that dry quickly out of the dryer early while letting others continue to dry.
-
Page 37: Simple Steps To Start
Simple steps to start 1. Press POWER to turn on the dryer. 2. Turn the Cycle Selector to select a cycle. 3. Change the cycle settings (Dry Level and Time) as necessary. 4. Optionally, you can activate options available by pressing the relevant button (Mixed Load Bell, Anti Static, Wrinkle Prevent, and/or Eco Dry). -
Page 38: Cycle Overview
Operations Cycle overview Sensor Dry Sensor Dry cycles sense moisture in the load and stop the dryer when the load reaches the dryness level you have selected with Dry Level. Cycle Description For most fabrics including cottons and linens. NORMAL If NORMAL is selected, the Eco Dry function is enabled by default. -
Page 39: Cycle Guide
Steam Cycles Use steam to reduce wrinkling and odors on items. Cycle Description Use to smooth out wrinkles and reduce odors in loads of one to four items. With this cycle selected, a small amount of water is REFRESH sprayed into the dryer drum after several minutes of tumbling with heat. -
Page 40: Special Features
Operations Item Description Do not dry on a heat setting. Use AIR FLUFF. Foam Rubber (rug backs, stuffed toys, WARNING shoulder pads, etc.) Drying a rubber item with heat may damage it or cause a fire. Use NORMAL. • Add a couple of dry towels and a pair of clean sneakers to help Pillows the tumbling action and to fluff the items. - Page 41 To use Smart Care, you must have the smartphone are parallel or nearly Samsung Smart Care app installed on your parallel. smartphone. • After you use this function, the dryer...
-
Page 42: Maintenance
Maintenance Keep the dryer clean to prevent decreased performance and to lengthen its life cycle. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. -
Page 43: Cleaning
Cleaning Feature panel Dryer exterior • Clean with a soft, damp cloth. Do not • Clean with a soft, damp cloth. Do not use abrasive substances. use abrasive substances. • Do not spray liquid cleaning agents • Protect the surface from sharp objects. directly on the display of the dryer. -
Page 44: Troubleshooting
Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • Make sure the door is latched shut. • Make sure the power cord is plugged into a live electrical outlet. - Page 45 Problem Action • Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly. • It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle. Is noisy. •...
-
Page 46: Information Codes
The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Information codes If the dryer fails to operate, you may see an information code on the display panel. - Page 47 • If this information code remains, contact a Samsung customer service center. Incorrect door switch. • Contact a Samsung customer service center. If any information code keeps appearing on the screen, contact a local Samsung service center. English 47 DC68-03170Y-10_IB_DV7750M_EN_R.indd 47 DC68-03170Y-10_IB_DV7750M_EN_R.indd 47...
-
Page 48: Specifications
Specifications Fabric care chart Bleach The following symbols provide garment care direction. The clothing care labels Any bleach (when needed) include symbols for drying, bleaching, drying and ironing, or dry cleaning when Only non-chlorine (color-safe) necessary. The use of symbols ensures bleach (when needed) consistency among garment manufacturers Tumble dry... -
Page 49: Protecting The Environment
Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Drip dry Warning symbols for laundering Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment This appliance is manufactured from... -
Page 50: Specification Sheet
Specifications Specification sheet NOTE “A. Height” Spec can vary from 46 to 46.5 inches (116.8-118.0 cm) depending on the leveling feet adjustment. Type Front loading dryer Model name DVE(G)52M775** Capacity (Cu.ft) Product - inches (cm) 46.0 (116.8) A. Height Required for Installation - inches 48.0 Product - inches (cm) 27.0 (68.6) -
Page 51: Cycle Chart
Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about full. - Page 52 Specifications NOTE • : factory setting, : can be selected Temperature setting Time Cycle Extra setting High Medium Med Low NORMAL HEAVY DUTY BEDDING Sensor Dry PERM PRESS DELICATES TOWELS ACTIVE WEAR ...
- Page 53 If the product is located in an area where service by a SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG authorized service center for service.
- Page 54 Visits by an authorized servicer to explain product functions, maintenance or installation are not covered by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these issues. English DC68-03170Y-10_IB_DV7750M_EN_R.indd 54...
- Page 55 PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
- Page 56 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 57 God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
- Page 58 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English DC68-03170Y-10_IB_DV7750M_EN_R.indd 58 DC68-03170Y-10_IB_DV7750M_EN_R.indd 58 2023-06-30...
- Page 59 Memo DC68-03170Y-10_IB_DV7750M_EN_R.indd 59 DC68-03170Y-10_IB_DV7750M_EN_R.indd 59 2023-06-30 2023-06-30 3:25:40 3:25:40...
- Page 60 Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca_fr/support (French) DC68-03170Y-10 DC68-03170Y-10_IB_DV7750M_EN_R.indd 60 DC68-03170Y-10_IB_DV7750M_EN_R.indd 60 2023-06-30 2023-06-30 3:25:40 3:25:40...