Subaru Outback 2012 Manual page 196

interval can be changed between 10 kHz
in the AM mode and 0.2 MHz in the FM
mode.
! Stereo indicator (type A and B
audio)
The stereo indicator "ST" will illuminate
when an FM stereo broadcast is received.
! Seek tuning (SEEK)
Type A audio:
1) Seek up
2) Seek down
Type B audio:
Seek up
Seek down
Type C audio:
Seek up
Seek down
If you press the indicated button briefly,
the radio will automatically search for a
receivable station and stop at the first one
it finds. This function may not be available
when radio signals are weak. When this
happens, perform manual tuning to select
the preferred station.
Audio
! Scan tuning (SCAN)
Type A audio
Type B audio
Type C audio
If you press the "SCAN" button, the radio
will switch to the scan mode. In this mode,
the radio scans through the radio band
until a station is found. The radio will
briefly stop at the station while displaying
the frequency, after which scanning will
continue until the entire band has been
scanned.
Press the "SCAN" button again to cancel
the SCAN mode. If you press the "SCAN"
button while the radio is stopped at a
station, the radio stays stopped at that
station. If you press the button while the
radio is scanning, the radio stops at the
next receivable station (type A and C
audio)/The radio stops at a frequency
when the "SCAN" button is pressed (type
B audio).
Automatic tuning may not function prop-
– CONTINUED –
5-13