Remove the LCD panel
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 63
"Remove the strip cover" on page 65
Step 1.
Remove three screws.
Figure 64. Remove three screws
Screw specifications
M2.5 x L4
Step 2.
Carefully pull out the pieces of removable tape with tweezers.
Figure 65. Pull out the pieces of removable tape with tweezers
Step 3.
Disconnect the cable connected to the LCD panel and then slide the LCD panel down. Disconnect
the EDP cable from the LCD panel and remove the LCD panel.
66
Hardware Maintenance Manual
Number of screws
3