Tv Mode; Basic Functions - Grundig Fine Art 37 LXW 94-9650 FHD Manual

AV
PIP
z
TOP
MENU MENU
TV-G
d d
SCAN P
S
PAT
DR DVD
AUX
Personal Remote 100

TV MODE

_______________________________________________

Basic functions

Switching on
Press » « on the television to switch it on.
1
Press »1...0« or »P+« or »P-« to switch on the device from
standby mode.
Note:
This television is equipped with a highly-sophisticated computer.
After switching on the television, it takes about 20 seconds until
the operating system is loaded and you will then see a
picture.
Switching to and from standby
Press » « to switch the television to standby.
1
Press » « on the television set to switch it off completely.
2
– This saves electricity.
Selecting channels
Press »1...0« to select channels directly.
1
Press »P+« or »P-« to move up and down presets one at a
2
time.
Open the channel list by pressing »OK«, select the station with
3
»P+« or »P-« and press »OK« to confirm.
Selecting AV channels
To select AV channels, press »AV« to open the AV menu, press
1
»P+« or »P-« to select the AV preset and »OK« to confirm.
Adjusting the volume
Press » « or » « to change the volume.
1
Muting
p
Press » « to mute the sound or switch it on again.
1
Showing and hiding programme information,
the date and time
Press » « to show or hide the information.
1
Changing the picture format
The television automatically switches to the 16:9 format if this for-
mat is detected via the SCART socket.
To select the picture format, press »
1
format« menu and press »P+« or »P-« to select the format.
« to open the »Picture
E
15