Easy Dialog system »Easy Dialog System« – the interactive operating manual 15-16 TV mode Basic functions Zapping function 17-19 The Grundig TV Guide The electronic television programme guide Setting up the TV Guide Sorting TV programmes TV Guide settings 20-21 Teletext mode...
Page 3
CONTENTS ____________________________________________ 33-35 Information Technical data Service information for dealers Environmental note Troubleshooting Additional Information for units sold in the UK.
SET-UP AND SAFETY ___________________________ Please note the following instructions when setting up the television set: This television is designed to receive and display video and audio signals. Any other use is expressly prohibited. The ideal viewing distance is five times the diagonal screen size. Light falling on the screen impairs picture quality.
Page 5
SET-UP AND SAFETY ___________________________ When deciding where to put the device, remember that furniture is often coated with various types of varnish and plastic. Many of these contain chemicals which can corrode the feet of the device, leaving marks on the surface of the furniture which can be difficult or impossible to remove.
CONNECTION AND PREPARATION Connecting the antenna and power cord VIDEO AUDIO IN S-VHS VIDEO AUDIO AV 2 SP-DIF SERVICE LINE OUT AV 1 OPTICAL OUT COMPONENT INPUT AUDIO IN DVI-I HDMI G-BUS É Plug the roof antenna cable into the antenna socket » «...
CONNECTION AND PREPARATION Mounting the glass pane Put on the cotton gloves supplied to prevent getting fingerprints on the glass pane. Put the glass pane in the recess of the front frame and press down until it latches into place.
CONNECTION AND PREPARATION Cleaning the glass pane Only clean the glass pane with commercially available glass cleaner. High definition – HD ready Your television can playback high-definition television signals (HDTV). You can connect the input sources (HDTV set-top box or High Definition DVD player) to the »HDMI«...
OVERVIEW ____________________________________________ Connections on the television set S-VHS VIDEO AUDIO VIDEO AUDIO IN AV 2 SP-DIF SERVICE AV 1 OPTICAL OUT LINE OUT COMPONENT INPUT AUDIO IN DVI-I HDMI G-BUS S-VHS VIDEO AUDIO VIDEO AUDIO IN AV 2 SERVICE SP-DIF LINE OUT AV 1 OPTICAL OUT...
OVERVIEW ____________________________________________ The remote control (TV mode) Switches the television off (standby). Switches the television on from standby mode. 1…0 Selects channels directly. Calls up information on the selected function. Opens the »Format« menu. Then use to make the selection. Displays an inset picture.
Page 11
»4«, »5«, »6« for a GRUNDIG DVD recorder. »1«, »4«, »7« for a GRUNDIG digital receiver (remote control level 1). »2«, »5«, »8« for a GRUNDIG digital receiver (remote control level 2). »3«, »6«, »9« for a GRUNDIG digital receiver with a hard disc (PDR).
OVERVIEW ____________________________________________ The remote control (teletext mode) Enter teletext page numbers. 1 … 0 Switches to double character height. Opens page 100. Scrolls to the next page. Scrolls back a page. Switches between teletext and TV modes. (red) Scrolls back a page. (green) Scrolls to the next page.
SETTINGS ______________________________________________ Tuning television channels The television is equipped with automatic tuning. You start the search and can then sort the channels into your order of preference. There are 99 presets, to which you can assign channels from the antenna or from the cable connection. You can delete channels from the list which were found more than once or which have poor reception.
EASY DIALOG SYSTEM _______________________ »Easy Dialog System« – the interactive operating manual Your television features the »Easy Dialog System« – a kind of inter- active operating manual. This interactive operating manual has menus, a user guide and a help function to show you how to operate the television and the many numerous feature it offers.
TV MODE _______________________________________________ Basic functions Switching on Press » « on the television to switch it on. Press »1…0« or »P+« or »P-« to switch on the device from standby mode. Note: This television is equipped with a highly-sophisticated computer. After switching on the television, it takes about 20 seconds until the operating system is loaded and you will then see a picture.
TV MODE _______________________________________________ Freeze-frame If you wish to view a particular scene for longer, you can “freeze” the frame of the current programme. Press » « (yellow). Press » « (yellow) again to quit the function. Split screen This function shows the television channel on the right and the tele- text page on the left.
THE GRUNDIG TV GUIDE __________ The electronic television programme guide The TV Guide is an electronic programme guide which provides a fast and up-to-date overview of all the pre-programmed television programmes. Options Programme information is provided in a database which allows you to sort information in various ways, according to the following: –...
THE GRUNDIG TV GUIDE __________ Setting up the TV Guide Switch on the TV Guide with »TV-G«. – The TV Guide appears on the television screen. Select the television programme (TV Guide broadcaster) with »P+«, »P-«, » « or » « and confirm with »OK«.
THE GRUNDIG TV GUIDE __________ TV Guide settings Open the »EASY DIALOG« menu by pressing »i«. Select »Installation« with »P +« or »P -« and press »OK« to confirm. Installation TV Guide Select »TV Guide« with »P +« or »P -«...
TELETEXT MODE ___________________________________ TOP text or FLOF text mode Press »TXT« to switch on teletext. You can select teletext pages directly by pressing »1…0«. Press » « to return to page 100. Note: At the bottom of the screen there is an info bar with red, green and –...
Page 21
TELETEXT MODE ___________________________________ Increasing the character height If you have difficulty reading the text on the screen, you can double the character height. To enlarge the character height of a teletext page, keep press- ing » «. Page stop A multiple page may contain several sub-pages, which are automa- tically scrolled by the transmitting station.
USING EXTERNAL DEVICES _______________ Operation with external devices Note: Which television socket(s) you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available. Remember that with many external devices, the resolution of the video signal must be adjusted to the input sockets of the televi- sion (see the operating manual of the external device).
Page 23
USING EXTERNAL DEVICES _______________ ... With a digital audio/video signal Video signal: digital video; resolution: standard 480p, 576p; HDTV 720p, 1080i, 1080p. Audio signal: stereo, analogue. Preset »DVI Digital«. Connect the »DVI-I« socket on the television and the corre- sponding DVI socket on the external device using a standard S-VHS VIDEO AUDIO IN...
USING EXTERNAL DEVICES _______________ ... With S-Video signal Video signal: Y/C. Audio signal: stereo, analogue. Preset »C-AV«. Connect the »S-VHS« socket on the television and the corre- sponding socket on the external device using an S-Video cable (video signal). Connect the »L AUDIO R«...
USING EXTERNAL DEVICES _______________ Video recorder, DVD player or set-top box Connecting a video recorder, DVD player or set-top box AUDIO OUT DIGITAL AUDIO OUT VIDEO OUT EURO AV 110-240 V S-VHS ~ 50/60Hz 20 W VIDEO AUDIO IN AV 2 SP-DIF LINE OUT AV 1...
USING EXTERNAL DEVICES _______________ Decoder or satellite receiver A decoder is needed if the television receives encoded programmes from a privately operated station. Connecting a decoder or satellite receiver VIDEO AUDIO IN S-VHS VIDEO AUDIO AV 2 SP-DIF SERVICE AV 1 LINE OUT OPTICAL OUT COMPONENT INPUT...
USING EXTERNAL DEVICES _______________ Camcorders S-VHS VIDEO AUDIO VIDEO AUDIO IN AV 2 SP-DIF SERVICE LINE OUT AV 1 OPTICAL OUT COMPONENT INPUT AUDIO IN DVI-I HDMI G-BUS Connecting a camcorder Connect the yellow »VIDEO« socket of the television and the video output socket of the camcorder (VHS, Video 8) using an RCA cable (video signal), connect the »S-VHS«...
OPERATION AS A PC MONITOR ______ Connecting a PC S-VHS VIDEO AUDIO VIDEO AUDIO IN AV 2 SP-DIF SERVICE LINE OUT AV 1 OPTICAL OUT COMPONENT INPUT AUDIO IN DVI-I HDMI G-BUS Connect the »DVI-I« socket on the television to the correspond- ing socket on the PC using a DVI cable (digital video signal) or a DVI –...
RETROFITTING A DIGITAL RECEIVER Connecting a micro digital receiver to a television set You can retrofit your television with a micro digital receiver. Your dealer can recommend an appropriate receiver for you. The user guide for the receiver can be integrated into the television user guide by following a brief installation procedure.
RETROFITTING A DIGITAL RECEIVER Installing on the television set Switch on the television. EASY DIALOG Open the »EASY DIALOG« menu by pressing » «. 1 Settings 2 Rreset list Select »Installation« with »P+« or »P-« and press »OK« to 3 Installation confirm.
RETROFITTING A DIGITAL RECEIVER Operating the receiver with the television remote control Note: The receiver must be connected and installed to the G bus on the television set via the communication line. Switches the television off (standby). 1…0 Switches the television on from standby mode. Selects channels directly.
Page 32
»4«, »5«, »6« for a GRUNDIG DVD recorder. »1«, »4«, »7« for a GRUNDIG digital receiver (remote control level 1). »2«, »5«, »8« for a GRUNDIG digital receiver (remote control level 2). »3«, »6«, »9« for a GRUNDIG digital receiver with a hard disc (PDR).
INFORMATION _____________________________________ Technical data Mains voltage: 230 V, 50/60 Hz, (power supply control range 190 to 264 V) Power consumption: 171 W during operation (Fine Arts 37) 230 W during operation (Fine Arts 42) approx. 2 W in standby mode Audio output stage: Front 2 x 10 W music power (2 x 6 W sine wave) Subwoofer 20 W music power...
INFORMATION _____________________________________ Troubleshooting If the remedies given below do not work, please consult an autho- rised GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satel- lite receivers. Problem...
INFORMATION _____________________________________ Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European coun- tries. However, the mains plug and socket system for the UK differs from many European countries.
Need help?
Do you have a question about the Fine Art 37 LXW 94-9650 FHD and is the answer not in the manual?
Questions and answers