Sony Cybershot,Cyber-shot DSC-S600 Quick Start Manual page 2

3 Select the desired language, then click [Next].
The "License Agreement" screen appears.
4 Follow the instructions on the screen to complete the
installation.
Macintosh® OS 9.1/9.2, OS X (v10.0 or later)
There is no need to install the supplied software.
2 Connect your Camera to your Computer with the
USB Cable
When connecting your camera to your computer, be sure to use a
fully charged battery pack, batteries with enough capacity or an
AC Adaptor if available.
1 Insert the "Memory Stick".
2 Turn on the computer.
3 Turn on the camera, then connect the USB cable to the camera.
• When using the Cyber-shot Station, connect the USB cable to the
Cyber-shot Station, and do not turn on the camera in this step. Turn
on the camera when you mount the camera in the Cyber-shot Station
after performing step 4.
4 Connect the USB cable to the computer.
5 "USB Mode Mass Storage" appears on the screen.
Select Images and Copy to your Computer
3
Microsoft® Windows XP Home Edition/Professional
1 Make sure your camera and your computer are connected and
both are turned on.
2 Windows XP is set so that the OS AutoPlay Wizard activates.
Follow the Wizard instructions to copy images.
Microsoft® Windows Millennium Edition (Me)/2000
Professional
1 Make sure your camera and your computer are connected and
both are turned on.
2 Double-click [My Computer] and select [Removable Disk].
The contents of the "Memory Stick" appears.
3 Double-click on the [DCIM] folder, then open folder
"XXXMSDCF" or "MSSONY" in which the desired images are
located.
4 Select the images to be copied by dragging and dropping them
to your computer's desired folder.
Macintosh® OS 9.1/9.2, OS X (v10.0 or later)
1 Make sure your camera and your computer are connected and
both are turned on.
2 Double-click the new icon now appearing on the desktop. The
contents of the Memory Stick media will appear.