Specifications; Compatible Devices - Akai ACRB-2000 Manual

2. Do not squeeze or collide.
3. Do not disassemble or put into the fire, water, to avoid short-circuit leakage.
4. Do not use wireless chargers in severe high temperature, humidity or corrosive environments to avoid leakage of
damaged circuits.
5. Do not place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic
card failure.
6. Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the
wireless charger to avoid potential disruption to medical devices.
7. Keep children from the product in case they play the wireless charger as a toy to avoid accidents.
8. Keep the wireless charger and receiver device away from water and other liquids.
9. To clean the charger, make sure the power supply is disconnected.
10. Usage temperature: 0-45℃.
11. Usage humidity: 20-85% (40℃)
❖ All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
❖ Power adapter is not included. Please purchase otherwise or use phone original adapter.
III. Specifications
Input: 5V/3A, 9V/3A, 12V/2A
Output power: 15W (MAX)
Charging efficiency: 75%
Charging distance: ≤8mm
Frequency: 110-205KHz
Size: 140x117x73 mm
IV. Accessories
USB cable (1 meter)
Instruction manual
V. Compatible Devices
Products qualified with Qi standard.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the product or packaging means that the product should not be treated as household
waste. Do not throw garbage at the end of its life, but take it to a collection center for recycling. In this
way you will help to protect the environment and be able to prevent any negative consequences that
it would have on the environment and human health. To find your nearest collection center:
Contact local authorities
-
Access the website: www.mmediu.ro
-
Request additional information from the store where you purchased the product.
-
EN - ENGLISH