Download Print this page

Dell 1220 Setup Manual page 2

Hide thumbs Also See for 1220:

1. Projector Firmware Upgrade Setup

Part A: Connect the Mini USB cable and enter Download Mode

1. Plug in the power cord and perform following steps to enter download mode.

NOTE: Please DON'T press power button to turn on the projector when entering download

mode.

Step A: Press the Power button and hold it.

Step B: Continuously hold the Power button and press the Enter button simultaneously on

the remote control.

Step C: Release the buttons after Temp and Error LED LEDs are both lighted up.

Step A: Press and hold

the "Power" button.

2. Connect the Mini USB (type A to Mini-B) cable to the projector and the computer.

Step B: Press the "Enter"

button for a second.