Parameter
COG/SOG
Range: SENS, CALC
Local Time
WARNING
•
An internal Navis NavAP heading adaptive algorithm uses only calculated ROT data. Setting
intended only for presentation on APH panel display.
•
An internal Navis NavAP course control adaptive algorithm uses only calculated COG/SOG data. Setting
is intended only for presentation on APH panel display.
COG/SOG=SENS
Panel Settings
Active Palette
Range: Day, Night
Custom Setting
Range: Yes, No
Custom Setting
Range: Day Brightness,
Night Brightness
Skin Selection
Range: Day Skin, Night
Skin
Button Click
Select the source for the Course-Over-Ground and Speed-Over-
Ground data (COG-SOG) data in the Navis NavAP:
• SENS
— COG-SOG data from an external GPS sensor or ECDIS
• CALC
— Calculated COG-SOG data. Calculation based on the
position information from GPS or ECDIS system (Latitude and
Longitude)
Presentation Units: Degrees and knots.
Submenu used for local time correction for Ferry Track mode. Applica-
ble only for Ferry Track mode.
Display mode:
or
Day
Night
Custom brightness settings enabling/disabling:
• Yes
— customized brightness can be adjusted
• No
— brightness is controlled in Dimming mode
The customized brightness can be adjusted in that menu, if selected
parameter set to
(see above):
Yes
• Day Brightness
— brightness level for Day mode
• Night Brightness
— brightness level for Night mode
Use knob to set required custom brightness. Setting range of bright-
ness from ambient conditions is presented in the table below.
This menu item is used for selection of the presentation in
modes. Available skins:
Night
• Day Skin
— Default, Black, SilverLight
• Night Skin
— Gray, Green
This menu item is used to enable or disable a buttons click via internal
Beeper during their usage.
36
Description
is
ROT=SENS
and
Day