Symbols Used In The Manual; Manufacturer's Responsibility; User Characteristics; Safety - Ferroli LIRA SLIM PLUS Use, Installation And Maintenance Instructions

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 150
2.4

SYMBOLS USED IN THE MANUAL

Symbol
Description
ATTENTION!
Indicates warnings or procedures relevant to operator safety.
IMPORTANT!
Indicates instructions or information of particular importance which do not affect the operator's

safety.

2.5

MANUFACTURER'S RESPONSIBILITY

With the receipt of this manual, the Manufacturer declines any liability, both civil and criminal, direct or indirect, due
to:
▪ installation not compliant with the regulations in force in the country and with the safety directives/standards;
▪ partial or total failure to observe the instructions contained in the manual;
▪ installation by unqualified and untrained personnel;
▪ use not in accordance with the safety directives/standards;
▪ modifications and repairs carried out on the product, not authorized by the Manufacturer;
▪ use of non-original spare parts or parts that are not specific to the product model;
▪ lack of maintenance;
▪ exceptional events.
2.6

USER CHARACTERISTICS

The user of the unit must be an adult and responsible person with the necessary technical expertise for routine
maintenance of the product.
Make sure children do not approach the unit to play with it while it is in operation.
3.
SAFETY
3.1

GENERAL SAFETY WARNINGS

Read this instruction manual carefully before installing and using the unit.
Failure to comply with the provisions of this manual may void the warranty
and/or cause damage to property and/or people.
Installation, electrical connection, checking of the system, operation and
initial calibration of the unit must be carried out exclusively by qualified and
authorized personnel.
For direct electrical connection to the grid, a device must be provided
which ensures disconnection in case of overvoltage, in compliance with the
installation rules
The unit must be connected to a single flue that guarantees the draft declared
by the Manufacturer and which complies with the installation standards
provided for in the place of installation.
The room where the unit is installed must be have an air intake or a suitable
combustion air supply system.
154
A73023890 - Rev 00 - 06/2023
LIRA SLIM PLUS
EN

Advertisement

Table of Contents
loading

Table of Contents