JANE 40521 Quick Start Manual page 2

Inflatable bath
• Inflatable plastic bath exclusively designed for your baby's comfort and safety right from birth. Designed to grow with the
baby. Fitted with a separator to stop the baby from slipping. The separator has a Velcro strip so it can be quickly attached or
removed, making the inner space more versatile. As they are inflatable, they are very comfortable for the baby. • With fun
shapes and colours for the baby. • Capacity: 30 litres. • Exterior measurements: Length 78 cm x Width 43 cm x Height 37 cm.
• These measurements are a guideline, as it depends how fully the product is inflated. • Designed to be taken with you on trips.
When folded up it takes up very little space. • Hard-wearing, quality material, with 4 safety valves. • Ideal size for use in the
bath or shower tray!
Instructions for use:
¡IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
• Position 1: Place the separator in the bath as a headrest, then the baby can lie down with his head higher than his body.
• Position 2: Attach the separator in the Velcro in the middle of the base of the bath, this will allow the baby to sit up and the
separator will act as a safety bar, preventing him from slipping.
• Position 3: Remove the separator from the base of the bath, this will give the baby more space.
• Always check that the inflatable separator is in the correct position with the Velcro on the bottom so it does not harm the
baby's skin.
• Do not inflate with an air compressor.
• Cleaning and Maintenance: Clean with a damp cloth with neutral soap after use. If you are not going to use the bath for a
while, it is advisable to store it in its box, completely dry, or out of direct sunlight and away from sources of heat. Do not store
it in damp places or very hot places.
• The product does not provide any additional safety in terms of the risks of water, and children have drowned in bathtubs.
• Vulnerable age range: from 0 months to 12 months.
• Always check the water temperature before bathing the child.
• To prevent the risk of scalding, check the water temperature and make sure the child cannot access the tap. The ideal water
temperature for bathing the baby is 37°C.
• Do not use bathtubs on a raised surface, like a table for example.
• Check the product is fully stable before use.
• Do not use this device if any of the parts or accessories are broken or missing.
• Do not use replacement parts or accessories that have not been approved by JANÉ.
• Meets the safety requirements of Standard EN 17072:2018.
• Made in China.
¡WARNING! DANGER OF DROWNING:
• Some children have drowned while having a bath.
• Children can drown very quickly in very shallow water, even in just 2 cm of water.
• Always stay with the child during bath time.
• Never leave the child unattended in the bath, not even for an instant. If you have to leave the room, take the child with you.
• Babies and children are at risk of drowning when in the bath.
Pol. Ind. Riera de Caldes - C/. Mercaders, 34 - 08184 PALAU SOLITÀ I PLEGAMANS - Barcelona (SPAIN) - C.I.F. A-08234999 - www.janeworld.com
REF. 40521-40529