Connecting With A Hdmi To Dvi Cable - Hitachi 19LD4550C User Manual

Connecting with a HDMI to DVI cable


Connect the DVI output of the PC to the
HDMI IN 1(DVI) jack on the TV.

Connect the PC audio output to the
AUDIO IN (RGB/DVI) jack on the TV.

Turn on the PC and the TV.
Select HDMI1 input source using the

INPUT button on the remote control.
NOTE

To enjoy vivid picture and sound, connect a
PC to the TV.
 A void keeping a fixed image on the TV's
screen for prolonged periods of time. The
fixed image may become permanently
imprinted on the screen; use a screen saver
when possible.
 C onnect the PC to the RGB (PC) or HDMI
IN (or HDMI/DVI IN) port of the TV; change
the resolution.
 There may be interference relating to
resolution, vertical pattern, contrast or
brightness in PC mode. Change the PC
mode to another resolution or change
the refresh rate to another rate or until
the picture is clear. If the refresh rate of
the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.
 The synchronization input waveform for
Horizontal and Vertical frequencies are
separate.
 Connect the signal cable from the monitor
output port of the PC to the RGB (PC) port
of the TV or the signal cable from the HDMI
output port of the PC to the HDMI IN (or
HDMI/DVI IN) port on the TV.
 Connect the audio cable from the PC to the
 If using a sound card, adjust PC sound as
 This TV uses a VESA Plug and Play
 D DC protocol is preset for RGB (Analog
 I f required, adjust the settings for Plug and
 If the graphic card on the PC does not output
 If the graphic card on the PC does output
 DOS mode may not work depending on the
 F or best picture quality, using an RGB-PC
24
Get other manuals https://www.bkmanuals.com
HDMI IN 1
(DVI)
Audio input on the TV. (Audio cables are not
included with the TV).
required.
Solution. The TV provides EDID data to the
PC system with a DDC protocol. The PC
adjusts automatically when using this TV.
RGB), HDMI (Digital RGB) mode.
Play functionality.
analogue and digital RGB simultaneously,
connect only one of either RGB or HDMI IN
(or HDMI/DVI IN) to display the PC output on
the TV.
analogue and digital RGB simultaneously,
switch the TV to either RGB or HDMI;
(the other mode is set to Plug and Play
automatically by the TV.)
video card if you use a HDMI to DVI cable.
cable under 5m is recommended.
AUDIO IN
(RGB/DVI)