Related Manuals for WALPOL WPO55
Summary of Contents for WALPOL WPO55
- Page 1 Assembly and operating instructions Potentiometer speed control units Version 6.1...
-
Page 2: Table Of Contents
Content 1. General information 1.1. Note symbols 2. Important safety instructions 2.1. Personnel 2.2. Safety rules for working in and on electrical installations 3. Warranty 4. Delivery, transport, storage 5. Description 5.1. Speed controller type WPO 55 5.2. Speed controller type WPO 6. -
Page 3: General Information
1. General information 1.1. Note symbols Danger Caution Immediate hazard Low-risk hazard Failure to observe the warning will result in immedi- Failure to observe the warning may result in ate death or serious injury. moderate injury. Important Warning Danger with risk of property damage Potential hazard Failure to observe the warning may result in Failure to observe the warning may result in death or... -
Page 4: Safety Rules For Working In And On Electrical Installations
The operator must ensure that the personnel have been instructed in the operation and have understood the operating instructions. If anything is unclear, please contact Walpol or our representatives. 2.2. Safety rules for working in and on electrical installations 1. disconnect (disconnect all 2. -
Page 5: Description
It has a switch (dry contact) for remote ON/OFF switching of external devices. • The potentiometer is suitable for surface mounting (IP55). Type Dimensions Weight (height x width x depth) WPO55 128x108x73 mm 0.37 • Power supply: 10 Vdc (+ 10%). • Ambient temperature range: -20 ..50 ° C •... -
Page 6: Installation
Dim ensio ns & f ixing • Power supply: 10 Vdc (+ 10%). • Ambient temperature range: -20 ..50 ° C weig • Max. Voltage output 0 ... 10 V: 0.1mA • Operating temperature range for storage: -20 ..50 ° C MTP010 •... -
Page 7: Electrical Connection
7. Electrical connection Warnings: • Before installing and plugging the controller into the mains, check that the technical characteristics explained in these instructions also correspond to those of the electrical mains and voltage. • Always use good quality and appropriate electrical cables to connect the controller to the mains and voltage. •... -
Page 8: Speed Controller Wpo Infinitely Variable
zum Motor MTP010 | Potentialfreier Anschluss (nur bei Bedarf) Der über diese Klemmen angeschlossene Verbraucher z.B. Signalleuchte braucht einen eigenen Netzanschluss mit externer Kontakt eigener Absicherung. nur wirksam wenn Jumper J2 auf Position EXT ist Potentiometer mounted Jumper LED (J2) +10V Vout GND LED ist an, wenn extrener... -
Page 9: Disposal
The unit and the transport packaging consist mainly of recyclable raw materials. Spare parts • Only use original spare parts from Walpol! • When ordering spare parts, state the serial number of the speed controller. This is indicated on the type plate. - Page 10 Place: Gelsenkirchen Date: 01.012.2021 Maximilian Girnus Managing Director WALPOL GmbH...
- Page 11 FASAR ELETTRONICA S.r.L. Strada della Marina, 9/6 60019 Senigallia (AN) Tel.: 071.6609805 Fax: 071.6611573 E-mail: info@fasar.it www.fasar.it – www.fasarelettronica.com FASAR ELETTRONICA s.r.l. Strada della Marina, 9/6 – 60019 Senigallia (AN) – Italia SELF-DECLARES That the product: Five speed motor regulator p/n DS-X-H52-PO-5S conforms to the following standards: ...
- Page 12 ww. .eu...